PRODUCT
Protection:
○ Input low-voltage&over-voltage protection
○ Overheat protection
○ Output empty-load protection
○ Output short&reverse protection
○ Output over-current&over-voltage protection
○ Automatic shutdown when fully charged
Contact us
Product details
2200W max Intelligent Battery Charger
Optional Function:
1,Communication Protocol: CAN or RS485
2,Auxiliary Power Supply 12V
For Lithium Battery:
1,When LED light is green,the charger is ready to charge or charging is complete.2,When Green light is blinking,the charger is charging.
3,When Red light is blinking quickly,Input power failure.
4,When Red and green light is blinking alternately,the output is short-circuited or connection is reversed.
5,When Red light blinks 2 times,interval 1 second,then blinks 2 times again ,the charger temperature overheating alarm.
6,When Red light blinks 3 times,,interval 1 second,then blinks 3 times again ,the output over-current alarm.
7,When Red light blinks 4 times,,interval 1 second,then blinks 4 times again,the Output over-voltage alarm.
For Lead Acid Battery:
1,Battery power <80%,the red light blinks.
2,80%<Battery power <90%,the yellow light blinks.
3,90%<Battery power<100%,the green light blinks.
4,Battery power=100%,the green light is always on.
AC plug: US/EU/AU/UK/.....
AC wire: 1m/1.2m/1.5m/2m/.....
DC connector: Bare wire end/Anderson/REMA/EZGO/YAMAHA/YEEDA/SC/OT/Alligator clip/....
DC wire:1m/1.5m/2m/3m/.....
Print:Laser information on charger or make sticker on charger
If you only need to mount charger on board,this design as below can allow people set it up in 2 directions.You will find better way to place it.
Scope of application
Optional connector
Product packaging
FEEDBACK FORM CONTACT WITH US
RELATED PRODUCT